Curvalux Edge Node

Curvalux’s phased array multi beam system, designed specifically for operators and ISPs to provide highest fixed wireless broadband capacity for the last mile, rural and urban environments.

Curvalux is committed to supports its operators and ISPs partners globally with its revolutionary technological solutions providing highest fixed wireless broadband capacity with the best ownership cost.

CurvaNode

Curvalux, a highly disruptive wireless broadband mesh network topology based on a multibeam phased array technology is delivering a uniquely efficient and extraordinary low cost wireless access solution to address the digital divide in developing countries and in the rural areas of developed countries

Curvalux VS 4G or 5G?

Curvalux is phased array multibeam forming system
vs a wide area omni/sector system of 4G and 5G

STANDARD 4G AND 5G SYSTEMS

High capacity but short range wide area antennas

4G and current 5G systems use wide area sector based antennas which provide wide coverage which is good for mobile devices but for fixed applications is inherently inefficient use of power and spectrum as radio transmissions are sent to areas where fixed users are not located. Standard 4G and 5G systems require multi kilowatts of DC power which requires the use of expensive UPS systems and diesel generators in rural areas where reliable electric power is generally unavailable

High Capacity, Long Range, Low Power Consumption

Curvalux’s advanced multi-beam forming system is able to concentrate radio frequency energy into a very tightly focused beam similar to that of a laser pointer. Unlike a cellular tower antenna with a wide area coverage, Curvalux provides very high directivity of the coverage area which results in very high gain or the antenna at 23dBi boosting its signal strength and receptivity. The high gain we achieve allows us to dramatically reduce the amount of power we need to operate the Rf amplifiers. Instead of 10kW we only need 100W which can be powered by solar power. With a very small amount of electrical power we are able to send a very high powered signal to long distances. Having multiple beams allow us to use MIMO technology effectively allowing frequency reuse. Curvalux paired with Wifi 5 or 6 access points can reach users using a standard 20dBi CPE as far as 20km away. On multiple comprehensive testing jointly made with a leading mobile operator in Asia, a single Curvalux Edge Node was able to simultaneously deliver 2Gbps across 16 beams using Wifi 5 based access points and CPEs while using only 100W of power. This is 1/100th lower amount of energy consumed vs 4G and 5G systems.

STANDARD 4G AND 5G SYSTEMS

High capacity but short range wide area antennas
 
4G and current 5G systems use wide area sector based antennas which provide wide coverage which is good for mobile devices but for fixed applications is inherently inefficient use of power and spectrum as radio transmissions are sent to areas where fixed users are not located. Standard 4G and 5G systems require multi kilowatts of DC power which requires the use of expensive UPS systems and diesel generators in rural areas where reliable electric power is generally unavailable
 

High Capacity, Long Range, Low Power Consumption

Curvalux’s advanced multi-beam forming system is able to concentrate radio frequency energy into a very tightly focused beam similar to that of a laser pointer. Unlike a cellular tower antenna with a wide area coverage, Curvalux provides very high directivity of the coverage area which results in very high gain or the antenna at 23dBi boosting its signal strength and receptivity. The high gain we achieve allows us to dramatically reduce the amount of power we need to operate the Rf amplifiers. Instead of 10kW we only need 100W which can be powered by solar power. With a very small amount of electrical power we are able to send a very high powered signal to long distances. Having multiple beams allow us to use MIMO technology effectively allowing frequency reuse. Curvalux paired with Wifi 5 or 6 access points can reach users using a standard 20dBi CPE as far as 20km away. On multiple comprehensive testing jointly made with a leading mobile operator in Asia, a single Curvalux Edge Node was able to simultaneously deliver 2Gbps across 16 beams using Wifi 5 based access points and CPEs while using only 100W of power. This is 1/100th lower amount of energy consumed vs 4G and 5G systems.

Product Roadmap

Curvalux is a globally patented, advanced multibeam phased array wireless access and backhaul system that provides more capacity at longer range and lower power and lower cost user equipment than 4G or 5G

Curvalux mmWave Edge node

Stay tuned, Get updates and sales info

Curvalux Ptp

Curvalux Ptp is a dual band and dual polarized point to point connectivity solution with speeds above 3Gbps over several kilometres.

The system enjoys the high capacity available in the mmWave and the availability of the sub6 Ghz connectivity.

Curvalux CPE

The Curvalux CPE is advanced WiFi6 low cost fixed wireless access terminal that supports gigabit connectivity to homes.

The CPE can be easily self-installed (DIY), and consumes very low power, hence can be powered by solar and batteries as well as with POE.